Price List

T/C 26580-01

402.67

(Approved replacement for Pratt & Whitney

part # 3121657-02)

(Kit contains all Kit 1 parts in addition to these listed parts)

Kit 1:

Thermocouple Kit 26581.03

Approved replacement for Pratt & Whitney part # 3121657-01

PW100 Series T6 Immerison Thermocouple Apprived replacement for Pratt & Whitney p/n:

PT6A (T5) Thermocouple Approved replacement for Pratt & Whitney p/n:

Specialists

in Temperature Measurement

$150.00 minimum on all orders

Prices subject to change

Proudly

Manufactured

 in USA

RdF Corporation  ●  23 Elm Ave. ● Hudson, NH 03051-0490

800.445.8367 / 603.882.5195 ● fax 603.882.6925 www.rdfcorp.com

Headquarters 1933 Dover Road, Epson, New Hampshire  03204 Phone:  603-736-4892      Fax: 603-796-3323   Engineering Office 150 High Street Canton Massachusetts 32021-3311 Phone: 781 828 0451        Fax:  781 821 4091

August 12, 2004

To: Northstar Turbine Customers:

 Subject: Global Turbine Component Technologies, NEW FAA PMA Large Exit Ducts P/N PTC3031167, and Overhaul of P&WC Large Exit Ducts P/N 3031167 (S031167).

 Gentlemen: 

Global Turbine Component Technologies’ subsidiary, Power Turbine Components, has obtained FAA PMA on P/N PTC3031167 Large Exit Duct which is a replacement for P&WC P/N 3031167 Large Exit Duct. This FAA PMA Large Exit Duct is available for $3,700.00, parts are in stock for immediate delivery and these FAA PMA parts are eligible for installation on PT6A-11, 11AG, 15AG, 21, 25, 25A, 27, 28, and 110 engines. When a NEW FAA PMA P/N PTC3031167 Large Exit Duct is purchased and a REPAIRABLE P&WC P/N 3031167, 3031172, 3109263-01 or 3109266-01 is exchanged, there is a discount from the $3,700.00 price. The amount of the discount depends on the condition of the exchange part. 

Global Turbine Component Technologies has obtained FAA approval to overhaul P&WC P/N 3031167 Large Exit Ducts and (Stolper) P/N S031167 Large Exit Ducts. Global’s standard overhaul is to replace the Upper Shell and the Lower Shell (i.e. everything except the mounting flange) and to apply silicon aluminide coating (i.e. either Sermaloy J or All Seal). The price for this standard repair is $3,995.00 and the turn time is approximately twenty one (21) working days. Other repairs on this part number are available and priced accordingly. 

Post Service Bulletin 1434 – NEW P/N PTC3031167 and standard overhaul P/N 3031167 or P/N S031167 can be converted to the Post Service Bulletin 1434 configuration (e.g. P/N 3109263-01) for no additional fee, IF the Post Service Bulletin 1434 configuration is requested at the time the order is placed.

 For additional information, to purchase FAA PMA parts or to arrange for your parts to be overhauled, please call Mr. Ed Autuori, Global Turbine Component Technologies Tel: 860 528 4722, FAX: 860 528 0827, E-mail ed.autuori@globalturbine.com, or write to Global Turbine Component Technologies, 519 Nutmeg Road North, South Windsor CT 06074.

 Sincerely,

  Ralph Hawkins

Chief Engineer

Northstar Turbine LLC